These guides are designed to help you with common Tover requirements.
Tover Guides include:
- Moving your Tover Unit
- Calibrating your Tover Sensor
- Connecting your Tover unit to the internet
- Adjusting the playing surface
You can download a copy of the Tover User Manual from this page.
Moving your Tover Unit
You may wish to move your Tover unit to a new location or you may need to remove it to allow for decorating of for the unit to be sent away for maintenance / repair.
The following video describes the mechanism to unplug and unhook the unit.
There are instructions for both Tover 1 and Tover 2 units.
Calibrating your Tover Sensor
If you find that your Tover sensor is not working as should or is unresponsive, it is worth calibrating it to see if that resolves the issue.
The following video demonstrates how to this.
The calibration marker required will have been supplied with your unit but if you cannot find it you download a copy of the calibration marker from this page. This should be printed out at A4 size.
Connecting your Tover unit to the internet
The following video describes how to connect your Tover Unit to the internet.
If you have trouble connecting to a given network then it is worth checking with your IT person / department to find out if this requires special permission.
Adjusting the playing surface
Sometimes you may find that the table is moved or the Tover unit has been knocked which means that the playing surface may not match the surface correctly.
The following video describes how to adjust the playing surface of the Tover unit.